30 Series Torque Converter Clutch Kit: This 3/4″ Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
For your convenience this kit comes with both sprockets
This torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
The Belt Feature: Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.1.9cm / 0.75″). Center to Center of driver and driven: 6-15/16 to 7″
Special function:This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
Go Kart Torque Converter Kit comes with:1 x 3/4″ Driver Pulley;1 x 5/8″ Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.
Specifications:
Material: Iron & Aluminum
Drive clutch bore: 3/4″(19mm)
Driven unit: Diameter 6″ (5/8″ driven pulley)
Sprocket teeth: 10 tooth for #40/41/420 chain and 12 tooth for #35 chain
Engagement range: 2350 200 RPM
Recommended engine: 2HP-8HP
Belt: Asymmetrical type
Fits: All engines with a 3/4 inch straight crankshaft
Included: 1 x Drive Belt 1 x Plastic Cover 1 x 3/4″ Driver Pulley 1 x 5/8″ Driven Pulley (6″ Diameter) 1 x Aluminum Mounting Plate 1 x 10 Tooth Sprocket for #40 #41 Chain 1 x 12 Tooth Sprocket for #35 Chain 1 x Mounting Hardware Kit
Replaces OEM Part Numbers Comet 218353AComet 219552AComet 219456AComet 217610AComet 203814ATAV2 30-75Yelf Dog Drive Unit Q43201W