China factory supply 11*6.0-5 size black wheels tyre with metal rim for go kart

for specifications. Contact us with any questions or concerns!

SpecificationsProduct name11*6.0-5 wheels tyre with rimSize11*6.0-5Outside diameter11 inchInner diameter5 inchHeight6 inchColorBlackMaterialRubberFitsGo kart

Detailed Images

Under what circumstances will the life of the tire be shortened First, the runway surface is roughSome runways are paved with asphalt, or the wrong specifications of the gravel in the asphalt, or the rolling is not flat enough, resulting in rough road surface. Some runways use ready-made concrete floors, but the surface is rough or uneven. In some indoor runways, in order to improve the grip of the tires, a layer of emery is applied to the ground, and the ground is like a sand. In the above case, the wear of the tire will of course increase significantly.Second, the tire pressure control is not goodThe air pressure of the tire should be controlled within a reasonable range. Basically, after the rider sits on the karting, the tread of the tire fully contacts the ground, or the thumb can press the tread. If the tire pressure is too high, the tread will bulge and wear in the middle. If the tire pressure is too low, the tread will be worn on both sides after being pressed. The tire pressure of the front and rear tires should be reasonable, and the tire pressure of the left and right tires should be consistent, so that the four wheels can roll on one plane.Third, the front wheel is tiltedIf the kart’s frame is deformed, the knuckle shaft is bent, and the front wheel’s toe is not adjusted, it will directly cause the two front wheels of the kart to tilt to one side when the direction is straight, resulting in the use of the tire. Wear side. Specifically, it can be observed whether the wear of the two countersunk holes on the tread is similar. The normal wear of the tire is that the counterbore on the tread is ground and then worn.Fourth, mixed with different tiresDifferent brands of tires can not be mixed, even if the tire specifications are the same, because different brands of tires are different in design. Tires with different degrees of wear can not be mixed, and the left and right tires must be replaced at the same time, even if one tire can continue to be used, because the tread thickness of the new and old tires is different.

Other Products

10*4.5-5 tyre and rim19*7-8 tire and rim11*7.1-5 tire and rim

Go Kart Parts Motorcycle Parts ATV CTV Parts MiniBike Parts

Scooter Parts UTV Parts Bicycle Parts Customized Parts

Our Company

Taizhou Xinydd Machinery Co., Ltd. was founded in 2015. We located in Binhai Industrial Area, Taizhou, Zhejiang Province. We have professional engineers and management team in the producing of the clutches for U.S.A, Russian, Europe, Brazil, and other countries. We have enough ability to satisfy different requirements from yours in this field.Who could bring a lot of international experience and professional and an unparalleled level of service for you.

Packing Delivery

Our Service

FAQ

Q1. How to pay A: TT, PAYPAL, WEST UNION, DP, DA, Credit card up to you.Q2. What is your term of delivery A: EXW, FOB, CFR, CIF, DDU.Q3. How about your delivery time A: Generally, it will take 24-48 hours after receiving your advance payment. Some is one week. The specific delivery time depends on the items and the quantity of your order.Q4. How to produce customized products A: Yes, We can produce by your samples or technical drawings. We can build the molds and fixtures.Q5. How to get a sample A: We can supply the sample if we have ready parts in stock.Q6. Do you test all your goods before delivery A: Yes, we have 100% test before deliveryQ7: How do you make our business long-term and good relationship A: 1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.