Specifications
Continuous Rating: 275 Amps DC

Intermittent Rating: 455 Amps DC

Momentary Rating: 1250 Amps DC

Voltage Rating: 12-48V DC

Operation: On/Off

Terminal Stud Size: 2×3/8

Mounting: Recessed or SurfaceSize: 69 (L)x69 (W)x75(H)mm/2.75×2.75×3 inch

Materials: ABS plastic housing

Water Resistance: Yes
Installation Tips:
Step 1: Remove Cables from Battery(You should always disconnect both the positive and the negative cables from the battery poles to ensure your safety.)

Step 2: Remove Negative Cable Terminal(Once you have both cables removed, you need to remove the terminal from the end of the negative one.)

Step 3: Wire in Switch(Wire it in between the cable and the battery terminal so that the switch will break the connection to the battery when it is off. Make sure when you add the switch that you install it in the “On” position.)

Step 4: Reconnect Terminal

Step 5: Screw Switch to Frame

Step 6: Connect Battery Cables