This Listing includes 2Pcs Bright 35 LED Tear Drop Tail Lights (some customers DIY it as saddle bag lights) with Red Lens and Stud Mount Chrome Bezels. We add nuts to the package according to customers’ suggestion. Unit is supplied with 3 wire plugs for ground, brake/turn and tail light. (Black wire – ground, White wire is low brightness and Red wire is high brightness). if your stock part is the same as ours, you can make it plug and play, however, if the different plug, you need to cut the plug and rewire it; Note: if the taillight and stop light function properly, but the turn signal does not, please replace your existing flasher unit with an LED compatible flasher unit. Light is secured by the 2 studs (5.21″ apart) on the chrome bezel; Two Screws are included for mounting; These lights are tail lights and then get brighter for the turn signal and brake functions; These Lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. Light Size: 118mm x 56mm x 20mm (4.6″ x 2.2″ x 0.8″); Size with Chrome: 150mm x 66mm x 20mm (5.95″ x 2.58″ x 0.78″)
About PARTSam It all started in the summer of 2013 with a simple, with bold idea: make better auto parts. In other words, not just a better auto parts – a better way of doing things. A new kind of auto company that works hand in hand with users to do something amazing, something meaningful. Now PARTSam has grown tremendously to become one of the leading platforms of e-Commerce in the aftermarket auto parts industry. Inventory Management/Warehouse & Fulfillment C With our warehouse located in Milpitas, California, we take care of the inventory management for our products. This saves manufacturers space, time, and headache. Automated Multi-Channel Sales C We successfully advertise our products on multiple platforms and maintain top-rated healthy seller accounts, which keep customers drawn to our products. We are continually expanding our customer base as we add more sales channels. Professional Seller – Customers will deal directly with us in regards to issues and concerns they experience with the products. Manufacturers will not have to deal directly with the individual customers, but will experience the benefits of their business, which is the typical win-win cooperation.
Specifications Universal for Trucks,trailers,tractors,semi-trailer,Dump Truck,bus,boat,special vehicle,etc. Replacement for 1938 1939 ford hot rod Wiring Tips: 1.Disconnect battery: use caution when working with the leads of the new LED array. if they are shorted or connected improperly permanent damage may occur. 2.remove old taillights from vehicle, disconnect existing wiring. 3.pass provided wiring leads through center hole and position tailight assembly on body. Align mounting studs with existing holes and secure with supplied nuts. 4.Repeat for other side of vehicle. 5.Connect wiring as follows: Black-Ground / Red-High Brightness / White-Low Brightness 6.Reconnect battery and perform functional test of taillight. if the taillight and stop light function properly, but the turn signal does not flash properly. you must replace your existing flasher unit with an LED compatible flasher unit.
Features Size: 6″ x 2.6″ x 0.78″ ; Function as Stop Turn Signal Tail Brake Lights These Lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; 6″ Teardrop LED Trailer Stop, Turn, Tail Light; Chrome Bezel – Red; 35 Diodes; Light is secured by the 2 studs (5″ apart) on the chrome bezel;
Functions Wiring Tips: Black Wire is the Ground; Red Wire is the high brightness; White Wire is the low brightness WATERPROOF DESIGN With the IP65 Waterproof Silicone built, it will prevent from any sand, water, dirt, snow or dust. Brand Partsa m Brand Package Box, Renforced Carton, Shockproof-resist, Anti-damage.