1. Put on safety gear, including gloves and safety glasses.
2. Locate the drive belt on the motorcycle. It is usually behind the alternator and drive pulleys.
3. Disconnect the battery and remove any components that need to be removed to access the drive belt.
4. Remove the old belt and inspect it for signs of wear and tear.
5. Check the pulleys and tensioners for any signs of wear or damage.
6. Clean the pulleys and tensioners with a rag.
7. Install the new belt, making sure that it fits correctly and is properly aligned.
8. Tighten the tensioners and pulleys.
9. Check the alignment of the belt and pulleys.
10. Reinstall any components that were removed during the process.
11. Connect the battery and start the motorcycle.
12. Check the belt for signs of slipping or misalignment.
13. Adjust the tensioners and pulleys if necessary.
14. Check the belt again after a few hundred miles of riding to make sure that it is still properly aligned and tensioned.
“Keyword”
“how to install a motorcycle belt in argentina”
“how to install a motorcycle belt on a motorcycle”
“belt installation”
“how to install a motorcycle belt”
