1. Remove the wheel nut and axle:
Use a wrench to remove the wheel nut and axle. Start by loosening the wheel nut and then use the wrench to pull the axle out of the wheel.
2. Remove the wheel hub:
Use a flat-head screwdriver to pry the wheel hub off the wheel. If the wheel hub does not come off easily, use a pair of pliers to help loosen it.
3. Remove the bearings:
Use a bearing puller to remove the bearings from the wheel hub. Depending on the type of bearing, you may need to use a hammer to tap the puller in place.
4. Clean the wheel hub:
Once the bearings have been removed, use a cloth to clean the wheel hub of any grease or dirt.
5. Install the new bearings:
Using a bearing press, press the new bearings into the wheel hub. Make sure the bearings are properly seated and secure before continuing.
6. Reinstall the wheel hub:
Once the bearings are in place, use a flat-head screwdriver to reattach the wheel hub to the wheel.
7. Reinstall the axle and wheel nut:
Finally, use a wrench to reinstall the axle and wheel nut. Make sure the wheel nut is securely tightened before completing the installation.
“Keyword”
“how to replace bearings skateboard”
“how to replace bearings on a bike”
“how to replace bearings on roller skates”
