1. Begin by raising the UTV off the ground securely using a jack and a pair of blocks. Make sure the UTV is in a stable position before attempting to work on it.
2. Disconnect the battery and loosen the lug nuts on the wheel that will have the brake master cylinder installed.
3. Remove the wheel and set it aside.
4. Unbolt the brake caliper from the axle and remove it.
5. Unbolt the brake line from the brake caliper and the brake master cylinder.
6. Place the new brake master cylinder in the same position as the old one and bolt it in place.
7. Connect the brake line to the brake caliper and the brake master cylinder.
8. Reinstall the brake caliper and bolt it in place.
9. Reinstall the wheel and tighten the lug nuts.
10. Reconnect the battery and test the brakes to make sure they work properly.
“Keyword”
“utv master cylinder”
“how to assemble brake master cylinder”
“how to assemble master cylinder”
